> Someone(Randall maybe) here recently stated what the
> voltage that a fully charged 12 volt auto battery should
> hold. Could you repeat it.
> I'm rehabilitating a red top Lucas Pacesetter battery with
> EDTA and was wondering what my goal should be. It's holding
> 12.6volts after a full
> charging.
12.6 under a light load is probably what I posted. Frequently you can get
just a bit more with no load at all (known as 'surface charge') so it's best
to test with a small load.
Of course that is only one parameter, it tells you that it is acting like a
battery but not what it's internal resistance is. For that, you need to put
a very heavy load on it (like 300 amps) and check how far the voltage drops.
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|