> How many amps would I
> need if the wire is the ground to a relay that allows other
> relays to
> send current?
Depends on the relay (obviously), but a common automotive relay should draw
under 0.1 amp.
But make sure the module output is a constant "on" when you want the relay
on. Some outputs are only momentary.
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|