> Its my recollection that TR2-3B and probebly early 4 vertical
> links also had a finer thread and more of it than the later 3
> degree links on 4A and 6's.
Not sure about the thread pitch, but the length was definitely longer on TR2
through the end of TR4 than on 4A through 6.
> As far as the left and right
> hand threads goes, I have a pair off the car and on the bench
> and if it will help, can let the list know which thread goes
> on what side!
The threads remained the same on both sides through the end of TR4. The
trunnions were "handed" due to the angle between pin & vertical link; but
the links were the same from side to side (hence the threads were too).
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|