Thanks for the clear explanation Dave. I wasn't sure what to look for.
Tom
----- Original Message -----
From: <Dave1massey@cs.com>
To: <triumphs@autox.team.net>
Sent: Sunday, March 16, 2008 9:42 PM
Subject: Re: [TR] Anti run-on valve
> Sure. Apply 12 volts to the two terminals and the plunger should move.
>
> The bottom off the valve (opposite the terminals) is open to the bottom of
> the plunger. You can push it in with your finger to see it move.
> position the
> valve where you can see it and apply 12 volts and you should see it should
> pull in.
>
> Dave
> _______________________________________________
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|