In a message dated 3/20/2008 10:47:56 P.M. Eastern Daylight Time,
wbeech@flash.net writes:
The commission plate on my TR3 is pretty shabby, I notice that the big 3
sell replacements for a reasonable cost. Are these as good a quality as the
original?
Bill,
I believe the quality is acceptable on the repro plates for TR3's. I go
both ways on my TR's. Some have ratty to nice originals and some I have
replaced w/o being real picky about the stampings matching original type and
style.
Regardless just FYI, in VTR Concours judging all are good and no deductions
are taken for ratty originals or quality repro's.
Cheers,
Darrell
**************Create a Home Theater Like the Pros. Watch the video on AOL
Home.
(http://home.aol.com/diy/home-improvement-eric-stromer?video=15?ncid=aolhom00030000000001)
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|