----- Original Message -----
From: "K YONKER" <yandainc@msn.com>
To: "Flying Wedges" <tr8@mercury.lcs.mit.edu>
Sent: Saturday, July 19, 2008 11:43 AM
Subject: [Wedge] Fuel (Gas) Cap Seal
>I recall this might have been recently discussed,
> however is there any current availability of the rubber
> seal used on the later years, small sized fuel caps?
> I am not referring to the cap's large, spongy seal which
> I presume is/was utilized as a water/moisture barrier. I am
> referring to the seal fitted on the cap that provides
> a seal between the cap and the fill pipe. I can't seem to
> find a part number.....
>
> TIA for any and all replies.
>
> Rgds,
>
> Kirk Yonker
> 1981 Triumph TR8 fi non a/c
> Seattle
> --
> Forwarded via the TR7/8 mailing list. Please send administrative requests
> to the majordomo at tr8-request@mercury.lcs.mit.edu
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|