> One of the 3 'grub screws' is BOTH FROZEN AND HOLLOW in my half-installed
> steering wheel! Luckily, about 1/8" of it's tip protrudes and shows. Can
> it still work?
It could happen, but very unlikely IMO. I think you'll find that the stator
plate does not go back into position between the tip of the grub screw and
the steering wheel; with the result that the grub screws don't hold the
plate securely and hence the canceling mechanism doesn't work.
But I suppose there isn't a lot to lose by trying, so by all means have at
it.
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|