Re: [TR] Triumph letter mounting TR4

["Randall" <tr3driver@ca.rr.com>]

> Or better still, don't drill holes at all.  If you cut the 
> posts off the letters with a Dremmel tool and cutoff wheel, 
> you can use 3M double stick body trim tape to apply the lettering.  

How do you trim the tape to match the outline of the letter?

Randall
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive