triumphs
[Top] [All Lists]

Re: [TR] tuning webers

To: Triumph Sports car discussion <triumphs@autox.team.net>
Subject: Re: [TR] tuning webers
From: David Brady <dmb993@earthlink.net>
Date: Sat, 08 Nov 2008 18:07:30 -0500
Folks,

Thanks for your help. Here's what I'm running:

Three 40DCOE's,
Idle: 65F8
Air Corrector: 145
Emulsion: F11
Main: 125
Accel Pump Jet: 40
Aux Venturi: 45
Choke: 30mm

The motor is reasonably high performance. A lot of
work was done porting the intake runners and the head.
It's dyno-ed at 170hp.

I'm far from Weber expert. I'll try to get my hands on some
tutorial, but I don't really know where to start. It does idle
good, so maybe we can assume that the idle jets and the
progression circuits are good. It runs great above 3000rpm's
so the main's are probably fine. My first inclination is accelerator
pumps. Thanks for your help.

David Brady
'68 TR250


David Brady wrote:
> Folks,
> 
> I need some help setting up my triple webers on my TR250.
> I have a stumble in the mid rpm range, 1000 rpm to 2500
> rpm. It idles good and it runs well above 2500 rpm. I
> think I'm idling on the idle jets and not on the progression
> circuits. It seems to me that the problem is with the progression
> circuits or with the accelerator pumps. I'm thinking accelerator
> pumps. Any idea on what to try?
> 
> Thanks,
> David Brady
> '68 TR250, CD8124L
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>