testing . Carl
I grafted a new bulb and capillary tube on to my old gauge per the
internet instructions and it is currently working quite well. I was not
too picky about the style of the capillary tube so I bought the
cheapest
mechanical gauge that I could find to use a donor. If you have a high
wattage soldering iron and basic soldering skill, it's not very hard
to do.
Mike
Randall wrote:
> or there are instructions on the Internet for how to try to
> graft a tube and sensor from a replacement gauge onto your original
> gauge
> while keeping the sensor cold so the ether does not evaporate during
> the
> operation.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|