A friend called me today for some help on a TR 6 Master Cylinder rebuild.
Seems that after the rebuild he's having trouble getting the cylinder to bench
bleed from the port that flows to the front disc's. He's aware of the pitfalls
of the warning light union but hasn't gotten to that problem yet.
Any suggestions that I can pass along to him would be appreciated.
Hope to see many at TRF Summer Party this weekend.
JVV
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|