On Tue, Aug 25, 2009 at 1:38 PM, Gary Nafziger <nafzigerg@yahoo.com> wrote:
> just wondering what valve settings guys are using on bigger cams. lift
> .405-duration .282. S2 cam from TSI, Pandora, Ohio. He recommended .013
> but I read of others with higher gaps......... plus some who are using
> differant settings for exhaust/intake.
>
Valve settings are recommended by the cam producers, and you should use what
your cam provider tells you, not what others are using with different cams.
Also, you need to follow your cam producer's recommendations as to whether
you set the valves cold or hot.
Irv Korey
74 TR6 CF22767U
Highland Park, IL
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|