Re: [TR] TR4 rear pinion seal replacement

[Mark J Bradakis <mark@bradakis.com>]

> Is there anything special that has to be done to replace the seal or
> can I just remove the nut and flange, replace the seal, reinstall
> flange and then torque the nut?
>   

Yes.  Unlike the later TR6s with the one-time collapsible spacer, removing
and replacing the flange will not affect the mesh of the gears.

mjb.

_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums