I just tightened up the p/s visor on the TR4 -- perhaps it is similar
to the TR6 -- if so, took only a minute. Removed the visor, inserted
a phillips screwdriver that was slightly smaller then the rod diameter
& squeezed the housing with a pair of pliers in a bit from the end.
Used a bit of padding to protect the vinyl. Now it stays put.
Geo
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|