Andrew,
I'll jump in and forward a link provided by Geo Hahn last year. He used a
set from Harbor Freight and made a simple spacing gauge to align the
numbers.
Bill
I, too, used the stamps available from Harbor Freight. Made a guide from a
2x4 that allowed spacing to match original and kept the punch vertical.
Practiced on a Coke can:
http://members.cybertrails.com/~ahwahnee/commission-stamp.JPG
Font was close except for the '3' as there are 2 ways to print a 3 and TR
used the other one.
Geo
-----Original Message-----
The commission plate on TR250 CD8433L was pretty bad and so I bought a new
one from Moss. Does anyone have the tooling to stamp it for me?
Andrew Uprichard
_______________________________________________
Triumphs at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Manage your account:
http://autox.team.net/mailman/options/triumphs/wbeech at flash.net
|
