triumphs
[Top] [All Lists]

[TR] Tr4 diff cover

Subject: [TR] Tr4 diff cover
From: carlsereda at aol.com (carlsereda)
Date: Fri, 25 Feb 2011 13:12:03 -0800
Greg,
Randall's idea should work. I think I grasped tab open with locking 
jaw pliers way back when, and just barely pried open tab enough to 
release the brake line (certainly don't want to snap the tab off!).

Good luck,
Carl
'63 TR4 since '74


I'm planning to replace the gasket for the diff cover on my 64 tr-4.? 
There is a welded clip on the cover that holds the rear brake line 
tight to the cover. I thought I'd just pry open the clip and pop the 
line out, but I can't get the clip to spread open. any thoughts on how 
to free up this line ?


<Prev in Thread] Current Thread [Next in Thread>