[TR] accelerator shaft bushings

triumphs

[TR] accelerator shaft bushings

from [Bob]

Subject:	[TR] accelerator shaft bushings
From:	yellowtr at adelphia.net (Bob)
Date:	Fri, 25 Mar 2011 16:14:22 -0400
References:	<BLU160-w18E969A54FD82E0E109591BAB90@phx.gbl>

On Friday, March 25, 2011 09:24:57 am marty sukey wrote:
> Was there somebody on the list who was making accelerator shaft bushings,
> for where the shafts go through the bulkhead?
> 
> Thanks,
> Marty
Marty,

There is for the TR6. Art Lipp. Go to Bob Danielson's 6 web page for more 
info.

It took me about 5 minutes to install the bushings.

Bob

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[TR] accelerator shaft bushings, (continued) [TR] accelerator shaft bushings, marty sukey Re: [TR] accelerator shaft bushings, Irv Korey [TR] accelerator shaft bushings, Irv Korey Re: [TR] accelerator shaft bushings, Joe Honor [TR] accelerator shaft bushings, Joe Honor Re: [TR] accelerator shaft bushings, Joe Honor [TR] accelerator shaft bushings, Joe Honor Re: [TR] accelerator shaft bushings, Bob Danielson [TR] accelerator shaft bushings, Bob Danielson Re: [TR] accelerator shaft bushings, Bob [TR] accelerator shaft bushings, Bob <=

Previous by Date:	Re: [TR] accelerator shaft bushings, Bob
Next by Date:	[TR] Tr3A rear axle removal, Mike Newhart
Previous by Thread:	Re: [TR] accelerator shaft bushings, Bob
Next by Thread:	Re: [TR] [Fot] Pain.head gaskets, Brad Kahler
Indexes:	[Date] [Thread] [Top] [All Lists]