triumphs
[Top] [All Lists]

[TR] soldering

Subject: [TR] soldering
From: leejohn7 at gmail.com (Lee&John Howard)
Date: Sun, 4 Mar 2012 09:20:56 -0800
References: <3d9c7.41ec44ee.3c84e8e6@cs.com>
I'm with you on that, Dave. I usually try to position a wooden carpentry
clamp so that it can gently hold the wire while I apply the iron to the
bullet.
John Howard


On Sun, Mar 4, 2012 at 7:48 AM, <Dave1massey at cs.com> wrote:

> In a message dated 3/3/2012 10:00:42 PM Central Standard Time,
> nafzigerg at yahoo.com writes:
> > Do I need a larger soldering iron or do I need
> > different solder?  Is there a solder specifically for electrical
> > connections
> > in cars that has a lower melting point?
> >
>
> You have received a couple of well informed replies already but let me add
> my technique to the list.
>
> The secret to soldering is to get the parts hot enough to melt the solder.
> I apply a small ammount of solder to the tip of the soldering gun/iron as
> this will greatly improve heat transfer.  Then I heat the bullet since this
> is the largets mass.  I then apply the solder to the bullet.  When it gets
> hot enough the solder will begin to melt and I feed the solder in to make
> the
> joint.  With that ammount of heat and the bullet hot enough the wire will
> quickly heat up enough to take up the solder and the joint will be a solid
> one.
>
> I just made a dozen or so of these joints last weekend on my TR3 and the
> biggest problem I had was caffine related.  Trying to hold the soldering
> gun
> sdeady for the 30 seconds or so on a bullet ballanced precariously on the
> end
> of a small, wavering wire while trying to apply solder with the other
> required much concentration for this old man.
>
> It ain't easy and I have quite a bit of experience in electrical soldering.
>
> Dave
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/leejohn7 at gmail.com

<Prev in Thread] Current Thread [Next in Thread>