triumphs
[Top] [All Lists]

[TR] NGK plugs for TR2

Subject: [TR] NGK plugs for TR2
From: wbeech at flash.net (wbeech at flash.net)
Date: Thu, 15 Mar 2012 20:12:08 -0500
References: <4F627208.1060101@execulink.com>
Angelo,
Here is a chart that should help.  The "R" is for resistor, for what little
I know this is to keep the spark plugs from causing static  on your 60 year
old AM radio.  I am sure there are other reasons as well, but what is
important is the size and the heat range are the same.

http://www.ngksparkplugs.com/techinfo/spark_plugs/partnumberkey.pdf

Bill 

-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of Angelo Graham
Sent: Thursday, March 15, 2012 5:50 PM
To: triumphs at autox.team.net
Subject: [TR] NGK plugs for TR2

Hello List:
Trying to source some NGK plugs locally for my '2. Time to retire the old
KLGs.
  I take it that the TR2 can use the same NGK BP6HS as the TR3As, despite
the slight increase in engine performance of the 3A. Also, the NGK catalog
also lists a BPR6HS as the standard recommended plug for the TR3A. Does
anyone know if this 'new' number supersedes the old BP6HS? 
Should I still ask for an NGK BP6HS?
Thanks for any help with this one.
Angelo Graham

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/wbeech at flash.net

<Prev in Thread] Current Thread [Next in Thread>