John,
Congratulations on your 'Grand Voyage' through the neighborhood. What paint
were you cooking with the rear wheels? Maybe your safety brake was dragging
just a bit?
You can adjust the clutch travel at both the M/c and the S/c. At the
master there is the rod adjustment then the screw stop(I use this to get
both pedals even), the slave has a threaded adjustment on the end of the
push rod, similar to the master rod.
Bill
-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of John Gillis
Sent: Friday, March 16, 2012 5:52 PM
To: triumphs at autox.team.net
Subject: [TR] Pedal travel
As I slowly venture further in the TR2 (did a 3 mile circuit around the
neighborhood) quite surprised how well it all went, did get a fright when I
saw smoke billowing out of the rear wheels when stopped at the lights, but
fairly sure it was just paint heating up. I did feel I had too much clutch
pedal free travel, can this be adjusted? the brakes were REALLY good and
solid.
Regards
John
** triumphs at autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/wbeech at flash.net
|