triumphs
[Top] [All Lists]

[TR] TR3 Headlight Machine Screw Size

Subject: [TR] TR3 Headlight Machine Screw Size
From: keithstewart at execulink.com (Keith Stewart)
Date: Tue, 20 Mar 2012 22:44:16 -0400
References: <mailman.17.1332007203.24277.triumphs@autox.team.net> <B5A2D865-87E9-41F9-AFF5-D86C70E222F2@execulink.com> <00f501cd06ed$55cf7ed0$016e7c70$@rr.com> <AFAB71FA-BF3A-4D33-8BA0-687B4F828861@execulink.com> <013501cd0708$6d408490$47c18db0$@rr.com>
On 2012-03-20, at 10:15 PM, Randall wrote:

>
> BTW, it's probably best to complete the headlight alignment before
> installing the trim rings.  Mine were really, really tight, I'm not sure
> I'll be able to get them off again without damage.
>
> -- Randall
>


Thanks. I have a bit to go before I get to that stage. The nose clip is off
the car and I am installing the lights and grille surround - not the grille
yet - before attaching the nose clip back on the car. Much easier to access
the attachment points - and a much better working height - this way. Then I
can do the headlight alignment.

Once again, thanks for your help.

Keith R. Stewart
London, Ontario
E-Mail: keithstewartATexeculinkDOTcom

<Prev in Thread] Current Thread [Next in Thread>