Re: [TR] Update on addco sway bar

["Randall" <TR3driver@ca.rr.com>]

> I was happy to help and sent photos and measurements to the 
> individual who contacted me.
> Unfortunately, since then, silence.

When I had a similar incident with them, many years ago, it took about 3
weeks for the modified parts to show up on my doorstep.  No word from them
before or after, but the parts fit and I was happy.

> Basically, the problem is that the bar's side arms are too 
> short to allow the bar to be mounted high enough on the front 
> bumper supports to allow the bar to be level, and allow the 
> links to be vertical.

So, how far off is it?  10-15 degrees isn't going to hurt anything, IMO.
Mine was slightly off-level, with the car at normal ride height; and still
worked quite well.

After all, it doesn't stay level anyway.  The angles change every time you
hit a bump.

-- Randall  

** triumphs@autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/triumphs/mharc@autox.team.net