[TR] Valve Lash Adjustment Method

Subject:	[TR] Valve Lash Adjustment Method
From:	ahwahneetr at gmail.com (Geo Hahn)
Date:	Sat, 2 Jun 2012 06:56:38 -0700
References:	<9B2824F72CBB41E39983854016CF1956@DaveLaptop> <374918717.1216826.1338639897498.JavaMail.root@sz0059a.westchester.pa.mail.comcast.net> <000301cd40bf$332a16e0$997e44a0$@charter.net>

I just use the chart in the Haynes manual (ignoring the typo) which is
essentially the 'rule of 9' (i.e.looking at the 8 valves you note which
ones are depressed and adjust the ones that are 9 minus their position).

Other will have different ideas, but I always set the exhaust valves at
.012 as too loose is a bit noisy but too tight is expensive.

Geo

<Prev in Thread]	Current Thread	[Next in Thread>
Re: [TR] Silicon and Paint, (continued) Re: [TR] Silicon and Paint, Benjamin Zwissler Re: [TR] Silicon and Paint, Dave Connitt Re: [TR] Silicon and Paint, Dave Connitt [TR] Oils and the Sump Drain Plug Magnet, terryrs Re: [TR] Oils and the Sump Drain Plug Magnet, Geo Hahn Re: [TR] Oils and the Sump Drain Plug Magnet, Geo Hahn [TR] Oils and the Sump Drain Plug Magnet, Geo Hahn [TR] Valve Lash Adjustment Method, terryrs Re: [TR] Valve Lash Adjustment Method, Alex & Janet Thomson Re: [TR] Valve Lash Adjustment Method, Alex & Janet Thomson [TR] Valve Lash Adjustment Method, Geo Hahn <= Re: [TR] Valve Lash Adjustment Method, Geo Hahn Re: [TR] Valve Lash Adjustment Method, Geo Hahn [TR] Valve Lash Adjustment Method, Alex & Janet Thomson [TR] Silicon and Paint, Dave Connitt [TR] Silicon and Paint, Benjamin Zwissler

Previous by Date:	[TR] Oils and the Sump Drain Plug Magnet, Geo Hahn
Next by Date:	[TR] Brake Fluid, Rich White
Previous by Thread:	Re: [TR] Valve Lash Adjustment Method, Alex & Janet Thomson
Next by Thread:	Re: [TR] Valve Lash Adjustment Method, Geo Hahn
Indexes:	[Date] [Thread] [Top] [All Lists]