Re: [TR] quality synchros currently available?

["Chuck Arnold and/or Kathleen Kelley" <triosan@gmail.com>]

.moss has nice and expensive ones.
On Aug 4, 2012 9:08 PM, "aribert neumann" <aribertn@gmail.com> wrote:

> Greetings All:
>
>
>
> I suddenly need to source synchros for my early GT6 trans.  I reused my old
> synchros last time around and set aside the new ones.  Today I began to
> reassemble the trans w/ the unused synchros and they are junk ( I have no
> idea where I bought them 8 years ago)!  The space between the gear and
> synchro is about 0.010 or less instead of the 0.040+ gap.  For grins
> I chucked up one of these poorly made synchros in my lathe and removed
> about 0.030 stock from the flat surface.  Now I have the suitable gap
> between gear & synchro but if the taper diameter was mis-machined, what
> else will give me problems?   Are there any quality synchros currently
> available - and who sells them?
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/triosan@gmail.com

** triumphs@autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/triumphs/triumphs-archive@autox.team.net