Sorry, misread the original message. What Brad said.
Tony
At 12:08 PM 9/5/2014, Tony Drews wrote:
>You "just" need more leverage. Those seem much easier to tighten
>than to loosen. If you can slip a piece of tubing over the wrench
>to make it longer, that might do the trick. Or if you have a
>crescent wrench that's longer than the square end wrench, that may
>work to get it to move. Of course, make sure you're really turning
>in the "loosen" direction or it makes things worse. :)
>
>BTDT - good luck!
>
>Tony Drews
>
>At 11:46 AM 9/5/2014, Jeffrey Gayton wrote:
>>Greetings. Please forgive the newbie mechanical question, but Im having a
>>devil of a time removing the gearbox filler plug on my TR4. I just cant get
>>enough purchase with my square wrench. Every time I try to turn it, it slips
>>off. Please dont tell me I have to remove go in from the top!
>>
>>Thanks.
>>
>>-- Jeff
>>
>>** triumphs@autox.team.net **
>>
>>Donate: http://www.team.net/donate.html
>>Archive: http://www.team.net/archive
>>Forums: http://www.team.net/forums
>>Unsubscribe/Manage:
>>http://autox.team.net/mailman/options/triumphs/tony@tonydrews.com
>
>** triumphs@autox.team.net **
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage:
>http://autox.team.net/mailman/options/triumphs/tony@tonydrews.com
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|