Some penetrant (like PBlaster) might be helpful. I use a six point socket
for the initial loosening if I am expecting trouble.
A mini-impact working of the wrench (as opposed to a heavy-handed turning)
can have better results.
Going forward, I think keeping rubber caps on the bleeders reduces the
chance of future problems.
Geo
On Tue, Sep 16, 2014 at 2:30 AM, JOSEPH MATO <joemato@sbcglobal.net> wrote:
> I remember using a small torch to heat the screw up slightly red hot, then
> using a long wrench about 11 mm. Any other methods?
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/ahwahneetr@gmail.com
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|