A pass through the blast cabinet using glass beads or fine sand would put an
excellent paintable surface on it.
Greg G.
Osseo, MN
T-Mobile. Americaâ??s First Nationwide 4G Network
James Henningsen <trguy75@gmail.com> wrote:
>The good news is I am finally back to working on my TR4 restoration project.
>The replacement coolant pipe line that runs on the driver side of the engine
>from the front housing to rear of engine is stainless steel. Any
>recommendations on how to paint the stainless pipe so it adheres well. I am
>told the finish should be black like the engine. Powder coat?
>
>Thanks in advance.
>
>Jim Henningsen
>
>Ocala FL
>
>62 TR4
>
>75 TR6
>
>68 Land Rover
>
>
>
>** triumphs@autox.team.net **
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage:
>http://autox.team.net/mailman/options/triumphs/greg@gelhar.com
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/mharc@autox.team.net
|