triumphs
[Top] [All Lists]

Re: [TR] Lift-the -dot

To: "'Italyfound'" <italyfound@gmail.com>, "'*Triumphs List'" <triumphs@autox.team.net>
Subject: Re: [TR] Lift-the -dot
From: "Randall" <TR3driver@ca.rr.com>
Date: Mon, 6 Apr 2015 08:09:11 -0700
Delivered-to: mharc@autox.team.net
Delivered-to: triumphs@autox.team.net
Thread-index: AdBwL+MfqvjuSca5Q0OwqNHX3i9hlwASVkqQ
> Need to know the proper lift-the-dot stud for a 59 TR3A door. 
> The studs that are used for attaching the tonneau cover that 
> run the length of the door under the leather arm cap on top 
> of the door.

You want the ones with the long wood screw threads, TRF PN 552668.  Might be 
Moss P/N 226-408, but it is not clear to me from their
catalog whether those are the ones with the long threads for wood, or the 
shorter threads for sheet metal.  I've had trouble with
the shorter threads pulling out of the original holes (although it's easy 
enough to mend with some wood glue and a wooden match
stick).

> Are there sizes also?

No one seems to sell different sizes (as long as you don't get them mixed up 
with Tenax studs which are smaller and do come in
sizes).  But I have examples of at least two, maybe three different stud 
patterns and it's not clear why.  The short ones are more
flat on the top and harder to fit the snap over, so perhaps the taller ones are 
just a later "improved" pattern.  (I got the taller
ones when I ordered the part number above.)  Either one will work on your 
doors, though.

-- Randall  


** triumphs@autox.team.net **

Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>