triumphs
[Top] [All Lists]

Re: [TR] TR3 Radiator Design

To: David Friedlander <forzion7@gmail.com>, TR3 Triumphs <triumphs@autox.team.net>
Subject: Re: [TR] TR3 Radiator Design
From: Don Hiscock <don.hiscock@gmail.com>
Date: Mon, 18 May 2015 23:07:36 +0100
Delivered-to: mharc@autox.team.net
Delivered-to: triumphs@autox.team.net
References: <CAJ1eQwg0G96=yFxbLtLOQ09hz2wpw_u9_+9Q2ha+v9PeUOcELw@mail.gmail.com>
I had a Wizard Cooling radiator in my car when it came back on the
road in 2012.  Two of 'em in fact.  The first one had a upper tank
hose inlet that would have taken a truly interesting piece of hose to
connect with the thermostat housing.  It was offset by several inches
from being lined up.

Turns out Wizard Cooling were subcontracting work to people who had
wrong drawings or couldn't read the right ones, and it had to go back
to them.  The next one fit, but I was never convinced tank volumes or
flow rates were quite sufficient.  My car puked coolant every time I
drove it for about a year.  I went to a recored original.  Maybe it
was unrelated changes such as better tuning and engine break-in, but
the car seems much happier now.  The gently-used Wizard radiator is in
my parts stash.  If somebody is really eager for one, lemme know.

So here's a least one voice with something other than good things to
say about them...

On 5/18/15, David Friedlander <forzion7@gmail.com> wrote:
> Hoyt and all;
>
> Have you seen *this *page?
>
> http://www.wizardcooling.com/triumph-tr3-s/1913.htm
>
> I've heard nothing but good things about Wizard Cooling's quality...
>
> Dave Friedlander
>
>
> On Sun, May 17, 2015 at 5:21 PM, Hoyt Duff <hoytduff@gmail.com> wrote:
>
>> I know the popular mod to the radiator is to re-core it to eliminate
>> the hole for the starter handle.
>>
>> And the "performance" replacements all appear to be essentially
>> aluminum duplicates of the original design.
>>
>> Has anyone looked at triple-pass crossflow radiators? I realize that
>> the original rad is narrow, but only to clear the steering box; it
>> looks like it could be extended on the passenger side.
>>
>> Combined with a shrouded electric puller fan, it seems like that would
>> be a worthwhile improvement.
>>
>> --
>> Hoyt
>>
>> ** triumphs@autox.team.net **
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/triumphs/forzion7@gmail.com
>>
>

** triumphs@autox.team.net **

Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>