| To: | "'Triumph'" <triumphs@autox.team.net> |
|---|---|
| Subject: | [TR] TR6 Spring Packing - 2 or 3 Per? |
| From: | "D&BLambert" <dblambert@cox.net> |
| Date: | Sat, 19 Sep 2015 09:29:01 -0700 |
| Authentication-results: | cox.net; none |
| Delivered-to: | mharc@autox.team.net |
| Delivered-to: | triumphs@autox.team.net |
| References: | <K23T1r0120NyJgq0123UCC> |
| Thread-index: | AdDy4/luHe7ryQi7TZiMt+jmFl9TsgAFBtUg |
Hello, I am replacing the springs, front and rear, on my TR6 and will be using one aluminum spacer with each spring. Do I need to put a packing piece between the spring and the spacer? It appears that the spacer is machined with room to do so. In other words, do I need two packing pieces per corner or three? I'm using the urethane packing pieces, but that should be immaterial to my question I would think. Thanks, Dennis ** triumphs@autox.team.net ** Archive: http://www.team.net/archive |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [TR] What fun, Jeff Scarbrough |
|---|---|
| Next by Date: | Re: [TR] TR3 coil question, Anthony Rhodes |
| Previous by Thread: | [TR] Transport, Tom Householder |
| Next by Thread: | Re: [TR] TR6 Spring Packing - 2 or 3 Per?, Chad |
| Indexes: | [Date] [Thread] [Top] [All Lists] |