If you're not interested in keeping it original, you could always switch over
to a TR4 gauge and sensor setup.
?Sent from BlueMail ?
On May 3, 2018, 12:27 AM, at 12:27 AM, Hoyt Duff <hoytduff at gmail.com> wrote:
>Isn't there a "fix" to replace the tube with a part from NAPA? Not the
>entire gauge, but just the capillary tube? I remember reading about
>such a fix, but can't find it in my bookmarks.
>
>On 11/27/17, Randall <TR3driver at ca.rr.com> wrote:
>>
>> The "capillary" tube is mostly filled with ether, a very volatile
>> substance.
>> The tiniest crack will let it leak out, ruining the gauge. I have
>also had
>> several movements fail from overheating. One of the posters on
>another
>> forum has suggested that the movement comes apart inside when needle
>hits
>> the top of the scale, but I have not investigated that.
>
>>
>> -- Randall
>>
>
>--
>--
>Hoyt
>
>** triumphs at autox.team.net **
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage:
>http://autox.team.net/mailman/options/triumphs/cfmtr3a at verizon.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/triumphs/attachments/20180503/872b92cb/attachment.html>
|