triumphs
[Top] [All Lists]

[Fot] Cams

Subject: [Fot] Cams
From: fubog1 at aol.com (fubog1)
Date: Mon, 16 Jul 2018 07:30:53 -0400
References: <617A237F-580F-48AA-B3A0-B0B857E19254@cox.net>
 Generally any obvious wear or pitting would make it unserviceable, but the 
wear isn't always so obvious.
You can measure the lift and compare to spec, that will show any worn lobes, 
but the best way is to find someone who has a "cam doctor". It's a machine that 
sets it up and measures the complete profile.
Usually if there is anything apparent that suggests that there may be problems, 
there are...


Glen

 

 

-----Original Message-----
From: rbtr3a--- via Fot <fot at autox.team.net>
To: fot <fot at autox.team.net>
Sent: Sun, Jul 15, 2018 6:47 pm
Subject: [Fot] Cams

How do I determine if a cam is good or bad.  If there are any marks on it does 
that make it bad.   I do know that two of the lifters has pitting on the 
surface.  

Ronnie
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/pipermail/fot



-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/fot/attachments/20180716/f71899fa/attachment.html>

<Prev in Thread] Current Thread [Next in Thread>