Thanks. Iâ??m on it this weekend.
Sent from my iPhone
> On Feb 1, 2019, at 7:43 AM, Thomas Fansher <tfansher@comcast.net> wrote:
>
> I ground mine down
> Tom
>
> Sent from my iPhone
>
>> On Jan 31, 2019, at 6:47 PM, Stan Foster <stan@redtr6.com> wrote:
>>
>> I had that exact problem with my TR3. I ended up removing the chrome from
>> the end of the tube to allow the cap to slide on. I figured that end would
>> always be under the cap and covered with oil anyway.
>>
>> Stan
>>
>> -----Original Message-----
>> From: Triumphs <triumphs-bounces@autox.team.net> On Behalf Of James
>> Henningsen
>> Sent: Thursday, January 31, 2019 3:24 PM
>> To: triumphs@autox.team.net
>> Subject: [TR] Valvecover issue
>>
>> Team:
>> Had my valve cover rechromed. Looks great. Only problem is the extra
>> thickness on the oil filler tube from new chrome now will not let me slip on
>> my push on oil filler vent cap. His is an early 4 with similar setup to
>> TR3. Any ideas on what to do. I heard Iâ??d have to take valve cover to
>> chrome plater to have hem strip a bit off the surface. Another though was a
>> muffler shop that has a pipe expanding that fits he 1 1/2 inch diameter
>> opening of the push on cap. Any help much appreciated Jim Henningsen Ocala
>> FL
>> 61 TR3A
>> 62 Tr4
>>
>> Sent from my iPhone
>> ** triumphs@autox.team.net **
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/triumphs/stan@redtr6.com
>> ** triumphs@autox.team.net **
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/triumphs/tfansher@comcast.net
>
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/mharc@autox.team.net
|