Yes, I believe the short end is in the front (closest to the dash)
Think of it as wanting it as level as possible on the sloped tranny tunnel.
> On Sep 30, 2019, at 4:46 PM, Roger Elliott <elliottr@rmi.net> wrote:
>
> Hi,
>
> I replacing the lower gear shift boot/grommet on my wife's TR250. Part
> number 709329
>
> I am not sure which way it goes. There is a short end (left side of picture)
> and a taller end ((right side). I thought I would be able to tell which way
> it went when I test fitted it, but it doesn't seem to fit quite right either
> way.
>
> I suspect short end goes to the front, is that correct?
>
> Thanks,
> Roger
>
> <lower_shift_boot.jpg>** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/gdhuggins@genfiniti.com
** triumphs@autox.team.net **
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
|