Let me start by saying I am thinking aloud ð???: what if you removed the two
dash supports and dropped the heater down low enough that you could work on the
hose? You would have to remove the nut which secures the heater bracket to the
front scuttle and pull the Y-shaped piece which takes the demister hoses, but I
think that would be the way to replace a bad heater.
I just find that glove box such a pain to put in and take out - but I'm sure
that would work as well.
Andrew Uprichard
Jackson, Michigan
-----Original Message-----
From: Triumphs <triumphs-bounces@autox.team.net> On Behalf Of Art McEwen
Sent: Saturday, June 13, 2020 12:44 PM
To: triumphs@autox.team.net
Subject: [TR] Tr3 heater core hose replacement
So the heater hose in the passenger footwell developed a crack (luckily no
passenger at the time). Any guidance on how to get adult sized hands (and a
screwdriver) near the heater core side of the hose? Should I take the glove
box out?
Thanks,
Art
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/auprichard@uprichard.net
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/mharc@autox.team.net
|