Thanks, I'll check it out.
On Sun, Jun 21, 2020 at 12:31 PM Allen Hess <allen.k.hess@gmail.com> wrote:
>
> https://mossmotors.com/triumph-tr2-3-4/doors/doors-tr4-4a
>
> Plate #104 is an adjustable stop. Donâ??t remember, but it maybe controls up.
> Plate #62 is the lowered stop. Also on one of my doord, bolt #98 had worn
> its hole in the sheet metal and one of the X bars of #86 (one with the slot?)
> had bent. All of that due to worn channels, misalignment etc. So Iâ??d start
> with the first two.
>
> Allen Hess, TR4 since â??67
>
> On Jun 20, 2020, at 6:59 PM, Bob Leaver <boleaver@gmail.com> wrote:
>
> My drivers window will not go down all the way. It leaves 2 inches of
> window left to roll down. It just comes to a sudden stop and won't go
> further. I've taken the door apart and inspected. I can't find
> anything odd. When I measured the window height of the window and
> compare it to the passenger side it's about 1 !/2" higher when rolled
> up. I've checked the gears and the teeth look good and the coil spring
> looks good. I guess I'm going to have to take the passenger door apart
> and really compare the two. Any ideas?
>
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/mharc@autox.team.net
|