Thank you all, I guess I just missed it.
Bill
#dontkillgrandma
On Jul 28, 2020, at 6:33 AM, andrew uprichard <auprichard@uprichard.net> wrote:
Bill: it needs something. The books call for a fiber washer behind the
timing plate cover (Moss 324-680, TRF WF508) but I have been equally
successful with a felt washer in front - something you may be able to do
without too much difficulty.
Andrew
-----Original Message-----
From: Triumphs <triumphs-bounces@autox.team.net> On Behalf Of bill beecher
Sent: Monday, July 27, 2020 11:39 PM
To: Randall <triumphs@autox.team.net>
Subject: [TR] Timing cover leak
Hello List,
Just set the TR3 motor in and fired up for the first time, there is a small
oil leak at that post that goes through the center of the timing cover,
behind the pulley. I just had a nut and washer on it, should I have gone
with an o-ring or fiber washer? 20-20 hindsight, should have put something
behind it.
Many thanks,
Bill
#dontkillgrandma
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/auprichard@uprichard.net
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/mharc@autox.team.net
|