Most hobby paint comes in an acrylic formula that easily wipes off when wet,
and rubs off when dry. Just let the paint "flow" into the stamped numbers. If
it won't flow easily, thin it with water or rubbing alcohol.
> On 11/12/2020 4:36 PM Jim Henningsen <trguy75@gmail.com> wrote:
>
>
> Ok. I have seen restoration projects where the engine block ID number on a
> TR6 has very nice coloring so the ID number is yellow on the black painted
> block. Any ideas on how to rub in some yellow color on the ID numbers to
> replicate so you have neat and tidy and easily readable block number. I
> know, it's a bit over the top.
>
> Jim Henningsen
> Ocala,
> FL
> 61 3A
> 62 4
> 67 4A
> 75 6
> 81 8
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/pdqtr6@comcast.net
** triumphs@autox.team.net **
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
|