Re: MGB inertia cut-off switch

[cak@dimebank.com (Chris Kantarjiev)]

Ah. We're talking about a different switch, then.

I didn't realize that the MGB ever had an inertia switch, and
I don't know if Moss sells that switch.

The switch *I* bought, and that they are pushing in their catalogs
for $60, is of new manufacture, has a big red rubber boot
to protect the reset, and comes with a small wiring harness
and a Molex connector, rather than just spade lugs. 

Too bad I didn't know that there is a junkyard item that will work 
as well!