I need some advice. I believe I successfully converted my generator to an
alternator, but when checking the battery voltage I found the following:
At rest = 12.72
Running = 12.61
Under load = 12.54
I thought the alternator would not allow drop in voltage? How can I tell if
the alternator is working? Here is a link to photos and a diagram of how I
wired it. Thanks for your thoughts! http://flic.kr/s/aHsjxiGi5g
Skip Shervington
1958 TR3A TS34885L
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Vtr@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|