Subject: Re: [6pack] 6pack Digest, Vol 50, Issue 2

From: mjmullin--- via 6pack <[email-masked]>
Date: Wed, 20 Feb 2019 00:07:33 GMT

To my knowledge, the early hazard flasher switch with the flat face has never been available on the aftermarket. If you want an original, it’ll have to be a used one. The ‘72 switch with the dished face is supplied by the parts vendors, which requires a bit of filing/grinding to the dash in order to fit the wider switch. The wiring works without modification - it may be that you’ll need to experiment with the terminal connections (there may be six terminals on the later switch?) and a continuity checker to find the right connection combinations. Of the four wires connected to the haz switch on a ‘69, the the two light green/brown wires should be connected to work the turn signals, and the purple wire and purple /red wire should be connected to work the hazard flashers. Hope this helps?  Matt M. 
____________________________________________________________
1 Cup (Before Bed) Burns Belly Fat Like Crazy!
worldhealthlabs.com
http://thirdpartyoffers.juno.com/TGL3131/5c6c9a9bd4251a9a49c1st01vuc
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

[email-masked]
http://autox.team.net/mailman/listinfo/6pack

Unsubscribe/Manage: http://autox.team.net/mailman/options/6pack/[email-masked]