From mgb-v8-bounces+mharc=autox.team.net@autox.team.net Wed May 7 02:39:00 2008 From: "Paul Hunt" To: "Richard Gosling" Date: Wed, 7 May 2008 09:28:48 +0100 Subject: Re: [Mgb-v8] [Mgs] Tweel Ah yes, I intended to post the link to the video rather than the thumbnail - video here: http://us.tnpv.net/2005/MCH200510/Tweel_Public_13.mpg Other videos here: http://www.michelinmedia.com/videos/kw=MCHtweel ----- Original Message ----- > You got a better link than that one? All I get is a very small picture of > a > random car (could be an Audi A4? but it's too small to tell for sure) > driving round some cones on a wet track. _______________________________________________ Support Team.Net http://www.team.net/donate.html Mgb-v8 mailing list Mgb-v8@autox.team.net http://autox.team.net/mailman/listinfo/mgb-v8 From mgb-v8-bounces+mharc=autox.team.net@autox.team.net Wed May 7 11:26:17 2008 From: "The Rays" To: "MG-V8 List" Date: Wed, 7 May 2008 13:26:18 -0400 Subject: [Mgb-v8] How to remove a rheostat from the dash Does anyone know how to remove the rheostat from a 1980 MGB dash? I have the dash out of the car and have loosened the rheostat at the back of the dash but cant figure out how to get the knob off. Thanks in advance for your help. Jim Ray _______________________________________________ Support Team.Net http://www.team.net/donate.html Mgb-v8 mailing list Mgb-v8@autox.team.net http://autox.team.net/mailman/listinfo/mgb-v8 From mgb-v8-bounces+mharc=autox.team.net@autox.team.net Wed May 7 11:31:59 2008 From: "Dodd, Kelvin" To: "The Rays" , "MG-V8 List" Date: Wed, 7 May 2008 10:33:51 -0700 Subject: Re: [Mgb-v8] How to remove a rheostat from the dash Look at the bottom of the knob. There is a small recess. Push a punch into the recess and that will lift the retaining pin, while pushing up on the punch carefully pull the knob off. Kelvin Dodd > -----Original Message----- > From: mgb-v8-bounces+doddk=mossmotors.com@autox.team.net > [mailto:mgb-v8-bounces+doddk=mossmotors.com@autox.team.net] > On Behalf Of The Rays > Sent: Wednesday, May 07, 2008 10:26 AM > To: MG-V8 List > Subject: [Mgb-v8] How to remove a rheostat from the dash > > Does anyone know how to remove the rheostat from a 1980 MGB > dash? I have the dash out of the car and have loosened the > rheostat at the back of the dash but cant figure out how to > get the knob off. > > Thanks in advance for your help. > > Jim Ray _______________________________________________ Support Team.Net http://www.team.net/donate.html Mgb-v8 mailing list Mgb-v8@autox.team.net http://autox.team.net/mailman/listinfo/mgb-v8 From mgb-v8-bounces+mharc=autox.team.net@autox.team.net Mon May 26 07:52:15 2008 From: "Paul Hunt" To: "V8 list" , , Date: Mon, 26 May 2008 14:39:40 +0100 Subject: [Mgb-v8] New Haynes manuals Following the discovery of a Haynes Sprite & Midget tee-shirt for youngsters, these are a must for the Haynes enthusiast: http://www.amazon.co.uk/Spitfire-Manual-Restoring-Servicing-Legendary/dp/1844 254623 http://www.amazon.co.uk/Lancaster-Manual-Restoring-Servicing-Legendary/dp/184 4254631 _______________________________________________ Support Team.Net http://www.team.net/donate.html Mgb-v8 mailing list Mgb-v8@autox.team.net http://autox.team.net/mailman/listinfo/mgb-v8