[6pack] Door Pulls and Stuck Float

[J B]

The door pulls sound like the type off of the TR4 and TR5/250. I bought a set for a different non TR car project. The PO may have added them.

JohnB
Chicago

74 TR6


--- On Sat, 10/11/08, michael lunsford <mblunsfordsr at yahoo.com> wrote:

> From: michael lunsford <mblunsfordsr at yahoo.com>
> Subject: [6pack] Door Pulls and Stuck Float
> To: 6pack at autox.team.net
> Date: Saturday, October 11, 2008, 3:10 PM
> The only door pulls on the 1970 TR 6 were the ones moulded
> into the top of the
> door in the center next to the window.  The later cars had
> the pulls recessed
> into the center of the doors which is a better location
> than on our 1970
> models.  I don't know what year the change from the top
> to the center of the
> door but it was after my car was built in mid 1970.
>  
> In regard to the stuck float.  If the measures you have
> tried don't work you
> need to take the carb off and remove the float bowl.  You
> can then remove the
> float and check to see if it has any fuel inside either
> side of the float
> which could be the cause of your problem.  After that you
> should remove
> the needle valve, blow out the orfice with air and check
> for obstructions.  I
> don't see how the charcoal canister could cause the
> carb to overflow.
>  
> Mike Lunsford, 1970 TR 6 TBI. 1969 TR6-for sale
> _______________________________________________
> 
> Support Team.Net  http://www.team.net/donate.html
> 
> 6pack at autox.team.net
> http://autox.team.net/mailman/listinfo/6pack
> 
> http://www.team.net/archive
> 
> You are subscribed as jb_2email at yahoo.com