[6pack] Lowering ride height of late model TR 6

[Greg Perry]

Mike and Dave,

I would suggest using the shorter albeit stiffer springs with the original rubber bushings.  This would give a softer ride than using the urethane or nylatron bushings.  Unless others know how to lower the 6 another method. One could use the earlier rear springs on the later model and change the trailing arm mounts to the earlier configuration to lower the rear.   Triumph Tune has standard springs front tt4001 390 lbs/in fitted length 6.65"and rear tt4212 420 lbs/in fitted length 8.65" and lowered springs front tt4201 420 lbs/in 6.5" and rear tt4216 420 lbs/in 8.65" .  just 2 cents worth,  greg perry