[6pack] heater fan blowing fuse

Foster, Stan (HP IT) stan.foster at hp.com
Tue Mar 24 16:44:54 MST 2009


Bob, you got de-mimed by the autox mailer, it strips out anything that is not
plain text, 3k characters or less. For an online copy of the wiring diagrams
our friends at Advance Autowire still publish them online, click on Stock
Schematics in the left nav column.

http://www.advanceautowire.com/

Stan

-----Original Message-----
From: 6pack-bounces at autox.team.net [mailto:6pack-bounces at autox.team.net] On
Behalf Of Bob
Sent: Tuesday, March 24, 2009 11:19 PM
To: John VanNorman
Cc: 6-Pack
Subject: Re: [6pack] heater fan blowing fuse

Hi John,
See attached part of wiring diagram for 1971 in Clifton's Repair manual.
The green should have 12volts when the ignition is on.
To eliminate the switch with all wires disconnected (from the switch) except
ground on fan motor:
Touch green to green/brown or green/yellow and the fan motor should run with
the ignition switch on.
Or, touch 12v from the battery to green/brown or green/yellow and fan motor
should run.
If it runs then the motor should be OK, problem in switch or wiring.
Good luck.
Bob


More information about the 6pack mailing list