[6pack] radiator fan switch

[Bob Danielson]

Interesting that the radiator/fan combo didn't include a bung. If it's a 
Wizard radiator I'd question them as my Wizard/Spal combo pack 
(http://tr6.danielsonfamily.org/Radiator.htm) came the bung in the upper 
right corner.

Ideally you want the sensor in the radiator but I guess you could mount it 
in the hose coming out of the thermostat like I did for the coolant sensor 
in my TBI installation. There's a picture here 
(http://tr6.danielsonfamily.org/TBI%20Conversion/TBI%20Pictures/JEPGs/Coolant%20Sensor.jpg)

You should also consider a 3-way fan switch: auto-on, off, manual-on.

Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection,
Toyota 5 speed & Nissan LSD
http://tr6.danielsonfamily.org

--------------------------------------------------
From: <j.honor at comcast.net>
Sent: Saturday, September 11, 2010 6:25 PM
To: <6pack at autox.team.net>
Subject: [6pack] radiator fan switch

> I haveB a 74 TR6 with a new aluminum radiator with integrated spal 16 in 
> fan.
> it has no temperture bung so i cannot install a thermastat in the actual
> radiator. my options appear to add a simple on/off switch with relay/fuse 
> or
> is there also a way to integrate a thermastat that will not involve with
> actual radiator. this new rad/fan is replacing stock radiator with hayden 
> fan
> so electrical platform is ready as needed. regrads, Joe
> _______________________________________________
>
> 6pack at autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/6pack/75tr6@tr6.danielsonfamily.org