[6pack] Clutch slave pushrod

[Vsnively at aol.com]

Thanks Vance
 
 
In a message dated 9/30/2010 9:23:28 PM Eastern Daylight Time,  
v.navarrette at comcast.net writes:

Vic:

Normally hooking the pushrod to the upper  hole is a band-aid at
best, and you can expect the clutch operation to  degrade further until
this is no longer sufficient.
You  may be one of the few to skate by with this indefinitely,
but if you are  like most people with clutch issues they will return
shortly. The only  lasting solution is to find out what necessitated
using the upper hole and  correct the root cause.

Vance

-----Original  Message-----
From: 6pack-bounces at autox.team.net  [mailto:6pack-bounces at autox.team.net]
On Behalf Of  Vsnively at aol.com
Sent: Thursday, September 30, 2010 1:33 PM
To:  tr6taylor at webtv.net; 6pack at autox.team.net
Subject: Re: [6pack] Clutch slave  pushrod


Dick,

I've got under 20K on a new clutch. I was  having difficulty getting into

reverse, and it was scratching in the  lower gears. I moved the pushrod
to the 
upper hole on the actuation  arm, problem solved, so my self-adjuster 
obviously  isn't working,  despite the fact it's new. The spring in the
old one 
and the new   one seem very weak.  

Thanks,
Vic