[6pack] tr6

[Dale]

Dave
 
Agree with every thing that has been said. Try an unlit bottlle of
propane around the manifold and the carbs. If you rule out a vacuum leak, try
disconnecting the vacuum to the distributor. See what, if any effect this has
on the idle.
Have you rechecked the timing?      Dale
________________________________
From: Greg Lemon <glemon at neb.rr.com>
To: Irv
Korey <emanteno at comcast.net>; Dave <dave at ranteer.com> 
Cc: Triumph 6 Pack
<6pack at autox.team.net> 
Sent: Friday, February 1, 2013 11:45 PM
Subject: Re:
[6pack] tr6

Or the throttle discs not centered correctly, so won't seal or
close all the 
way, or choke/throttle accuation screws adjusted too far.

Greg
Lemon
TR250

--------------------------------------------------
From: "Irv
Korey" <emanteno at comcast.net>
Sent: Friday, February 1, 2013 9:21 PM
To:
"Dave" <dave at ranteer.com>
Cc: "Triumph 6 Pack" <6pack at autox.team.net>
Subject:
Re: [6pack] tr6

> On Fri, Feb 1, 2013 at 8:46 PM, Dave <dave at ranteer.com>
wrote:
>
>> triple carb, few other mods, carbs recently rebuilt by a mechanic
but I 
>> put
>> them back on.
>>
>> car idles at 2500; does not want to go
below.  have the idle screws all 
>> the
>> way out.
>>
>> thoughts?
>>
>
>
BIG vacuum leak or binding linkage, or some of both.
>
> Irv Korey
> 74 TR6
CF22767U
> Highland Park, IL
>
> ________________________________________
>
>
6pack at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive:
http://www.team.net/archive
> Forums: http://www.team.net/forums
>
Unsubscribe: http://autox.team.net/mailman/options/6pack/glemon@neb.rr.com
________________________________________

6pack at autox.team.net

Donate:
http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums:
http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/6pack/tpdwinch@yahoo.com