[6pack] [TR] TR6 Brakes

Ron Olds rolds at plausa.com
Wed Oct 4 20:14:06 MDT 2017


Dave,

I am going to start at the master cylinder and work my way down until they release.



Regards,

Ronald Olds
Vice President Sales & Marketing
Plasser American
Cell: 630-240-0818
rolds at plausa.com
Sent with Good (www.good.com)

________________________________
From: davehogye
Sent: Wednesday, October 04, 2017 10:10:51 PM
To: Ron Olds
Cc: Wbeech at flash.net; list, TR; 6pack at autox.team.net
Subject: Re: [TR] TR6 Brakes

Crack the flexible rubber line fitting.  Isolate the problem.

________________________________
From: "Ron Olds" <rolds at plausa.com>
To: "Wbeech at flash.net" <wbeech at flash.net>, "Dave Hogye" <dlhogye at comcast.net>
Cc: "Triumphs (triumphs at autox.team.net)" <triumphs at autox.team.net>, 6pack at autox.team.net
Sent: Wednesday, October 4, 2017 6:58:38 PM
Subject: RE: [TR] TR6 Brakes

Bill,

No the car hasn't been jacked up and no work has been done to the brake system. The pedal is all the way up and won,t go down because the brakes are fully on.



Regards,

Ronald Olds
Vice President Sales & Marketing
Plasser American
Cell: 630-240-0818
rolds at plausa.com
Sent with Good (www.good.com)

________________________________
From: Wbeech at flash.net
Sent: Wednesday, October 04, 2017 7:28:33 PM
To: Dave Hogye
Cc: Ron Olds; Triumphs (triumphs at autox.team.net); 6pack at autox.team.net
Subject: Re: [TR] TR6 Brakes

Have you jacked the car up recently?  Could be a crushed line.

Have you adjusted the rod at the master cylinder recently?  If it isn’t coming all the way back it can’t release the pressure.   BTDT on my TR3.

Bill B
TS30800L

Sent from my Heathkit H11

On Oct 4, 2017, at 5:00 PM, Dave Hogye <dlhogye at comcast.net<mailto:dlhogye at comcast.net>> wrote:

Calipers are seized from corrosion or flexible rubber lines have collapsed internally.

Sent from my iPhone

On Oct 4, 2017, at 1:59 PM, Ron Olds <rolds at plausa.com<mailto:rolds at plausa.com>> wrote:

Hello Everyone.

I finally had a chance to take the TR6 out last Sunday.  I had an issue with the brakes.  The front brakes locked up.  Each time I applied the brake they just locked up tighter. I haven’t had much of a chance to trouble shoot the problem but it appears that the brake fluid is not returning back into the reservoir.  I did crack the line at the master cylinder for the front and the pressure differential valve.  Some fluid started to come out of each one but I closed them both quickly after a few drops.  Didn’t make a difference, could be because I didn’t let enough out.

Before I tear the entire system down any suggestions as to what the problem could be?  This might be an opportunity to rebuild the system and replace the fluid with silicone  and rebuild everything.

Ronald Olds
72 TR6
50 MGTD

** triumphs at autox.team.net<mailto:triumphs at autox.team.net> **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dlhogye@comcast.net

** triumphs at autox.team.net<mailto:triumphs at autox.team.net> **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/wbeech@flash.net



More information about the 6pack mailing list