[6pack] Too quiet.

[DAVID MASSEY]

 I agree with Richard, it is too quiet here.
I somehow fell off the list many years ago but I am back (sorry).  The TR6 was off the road for several years after a pending major frame failure was discovered.  As much as I would LOVE to get a RATCO frame I don't LOVE it  6G's worth.  A local club member who happens to be a fitter/welder by trade offered to rework my frame so I disassembled the car and took the frame to him and after 7 months or so he rebuilt the main frame rails from about the mid point right to the rear of the car.  He also reinforced notorious week points such as the diff mounts and the attach points for the (aftermarket) rear sway bar.  He also handed me a 3-lb bag of rust scale he extracted from inside the frame.
I spend an afternoon with prods and compressed air and removed some more rust, then I treated the inside of the frame with Eastwood's frame rustproofing kit (I think I used two of them), painted the frame with POR15 (Note: POR15 does a very poor job of sticking to old paint) and reassembled the car.
I set up a camera on a (cheap) tripod and took a picture.  I installed the LF suspension and took a pic.  I installed the RF suspension and took a pic, front sway bar and took a pic, steering rack and took a pic... (you get the picture) so I now have a nice sequence of pictures of the car coming together.
The car has been on the road for a year now and so far I have 1) blown the diff and 2) blew a head gasket.  I drove this car for nearly 2 decades with nary a problem but I guess my luck had run out.  Keep in mind that this car has been to both coasts, Canada and up Pike's Peak so it is no slouch.
 
Dave 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/6pack/attachments/20190910/39863614/attachment.html>